45# thick wall
45# thick wall
45# thick wallThe butt joint of coiled pipe (with the same wall thickness) shall not exceed 10% of the wall thickness and not more than 2mm.
Effective.
.With the dissolution of the steel coil surface, the contents of iron, nickel and chromium in the solution will gradually increase. At this time, the solution will gradually lose its polishing ability. In any case, increase the temperature, turn on the current and equalize the force. For the analytical solution, if the iron content exceeds 60g / L and the valence chromium content exceeds, it indicates that the solution has been aged. There are two options for the regeneration of polishing solution and the restoration of polishing ability. When the solution is diluted with water to reduce the acidity, impurities such as iron, chromium and nickel can be locally precipitated as salt, and the precipitation at the bottom of the tank can be removed, and then heated and evaporated to remove water, so it is cumbersome to restore the original relative density, which requires a large consumption of energy and time. The other is to replace part of the solution, so as to retain 20% of the old solution and supplement 80% of the new solution. It can be polished with little or no power.
Welding voltage because the welding arc is conical, and the welding voltage directly affects the length of the arc. Therefore, with the increase of welding voltage, the moving range of arc spots expands, the weld pool widens, and a wider weld formation will be obtained. If welding is carried out in a horizontal position, it will only change the width of the weld without affecting the edge transition of the weld. However, the external welding of spiral welded pipe is carried out on the slope, and the molten weld metal will flow laterally under the action of gravity. It can be seen that the larger the welding voltage and the wider the weld pool the more serious the trend of lateral flow of weld metal, * eventually leading to the bias flow of weld metal. Coil products are not only rich in types, but also diversified in processing technology and molding. In most cases, after forming, the next process is to expand the diameter of the welded pipe blank to improve the quality of welded pipe shape. In other words, the expanding process has become an important process to ensure the quality of finished pipe in the production of large-diameter straight seam coiled pipe.
.Due to the continuous application of thick wall coiled pipe in industry and the continuous expansion of its scope, it has many advantages. In order to prevent the thick wall coiled pipe from rusting, we can apply antirust oil on the surface of the thick wall coiled pipe.
The rolling pipe production technology requires that the rolling pipe weld is a double-sided weld, two longitudinal welds are allowed, and the weld spacing exceeds 300 mm. The welding appearance and quality standard shall not be lower than the level standard in the welding specification.
Thick wall coiled pipe is made of steel plate. Thick wall coiled pipe can be divided into coiled pipe and hot rolled thick wall coiled pipe.
Thick wall coiled pipe is usually higher than dn450. Thick wall coiled pipe is sometimes two welds. Why does this happen mainly because of raw material problems and equipment processing problems? The steel plate with the required width of welded pipe required by the customer is usually not produced by the steel plant, so two plates need to be welded, so the weld will occur. The main problem of thick wall coiled pipe is welding. As long as flaw detection can be carried out, the requirements related to delivery are wider than other products. The detection of thick wall coiled pipe is mainly ultrasonic flaw detector. The longitudinal weld on the same cylindrical part of the coiled pipe shall not be greater than 2. When the coil pipe is butt welded, the corresponding parts shall be flushed to. When the nominal diameter is larger than the inner seal, the bottom seal welding shall be carried out. The surface of the circuit board shall be protected from damage during tube rolling treatment.
When the coil pipe is butt welded, the corresponding parts shall be flushed to. When the nominal diameter is larger than the inner seal, the bottom seal welding shall be carried out. During pipe rolling treatment, it shall be protected.
Weight per meter of steel plate coil = (outer diameter wall thickness) * wall thickness * 0.0246615 steel plate coil is made of steel plate. Thick wall t-welded coil can be divided into coil and hot rolled thick wall coil.
Discount.The function of parameters of pipe rolling equipment is improved by 30%,Q235B straight seam welded pipe, which fills the gap that can not be produced by traditional steel rolling equipment. It can produce steel pipes with diameter of more than 400 and wall thickness of 4-100mm. The main materials are q23q3420, 435cimo and 42cimo, GB / t3092-2001 cold-rolled sheet can be used for pipe rolling. Product standards: GB / t50205-200, etc.
The influence of welding process parameters mainly includes two aspects: according to the production characteristics of spiral steel pipe, the welding current is usually smaller for internal welding and larger for external welding. However, under the condition of large welding current, the stirring effect of molten pool is intensified, and the melting amount of welding wire is also the same
Recently, with the rapid development of excellent strip continuous rolling production and the progress of welding and inspection technology, the weld quality has been continuously improved, and the technology of welded pipe has also been continuously improved, and the application field is relatively wide, so as to gradually replace the seamless steel pipe. The main one is the technological development of welded pipe. Our welded pipe is made of steel plate or strip steel and welded after crimping. It is generally a welding process, then the upper level, and then the difficulty. In principle the pipes connected to the machine are arranged from inside to outside to reduce the impact of welding stress on the installation accuracy of the machine. The joints of indoor and outdoor pipes shall be left outdoors. Q345B thick wall continuous pipe is a widely used carbon steel material. Q345B thick wall continuous pipe with thickness greater than 10mm is widely used in drainage engineering,Q460b thick wall coiled pipe, sewage pipeline, dredging pipeline, construction pipeline, etc. Q345B thick wall continuous pipe is a welded steel pipe product with relatively simple and flexible process. This kind of steel pipe is usually not in stock and is customized. If the quantity is small, the raw materials are not good. The main problem of Q345B thick wall continuous pipe is welding. As long as possible, delivery related requirements can be compared with other products.
Purpose of steel plate rolling: steel plate rolling is mostly used in large-scale steel structure construction as the main support part such as bridge piling, seabed piling and high-rise building piling. Its material: Q345C. Q345D and Q345E are also used in low temperature areas.
The steel plate or strip is bent and then welded to form a thick wall coil. According to the welding form, it is divided into straight seam welded pipe and spiral welded pipe. It is divided into ordinary welded pipe, galvanized welded pipe, oxygen blowing welded pipe, wire sleeve, metric welded pipe, rolling pipe, deep well pump pipe, automobile pipe, transformer pipe, welded thin-wall pipe, welded pipe and spiral welded pipe. Coil pipe is dedicated to the production of, and is modified according to similar specifications of traditional rolling equipment. The function of increasing the parameters of spiral steel pipe equipment by 30% fills the gap that the original traditional rolling equipment can not produce. It can produce steel pipes with a diameter of 400 or more and a wall thickness of 8-100mm. The material mainly includes q23 q34 20#, 16 manganese, 16 manganese capacity, etc. Product executive standards include: GB / t50205-2001, GB / t3092-2001, etc. The products are widely used in petroleum, chemicals, natural gas transportation,Q550b large diameter reel, pile driving, urban water supply, heating, gas supply and other projects.
.Thickness detection thickness detection is very simple, from difficult to easy from the lower layer to the upper layer, from the pipe gallery to the equipment. In principle, the pipeline connected with the machine is configured from the inside to the outside to reduce the impact of welding stress on the installation accuracy of the machine. The interface between indoor and outdoor pipelines shall be left outdoors. Q345B thick wall coiled pipe is a kind of material in carbon steel and is widely used. The thickness of Q345B thick wall coiled pipe is generally more than 10mm, which is widely used in drainage engineering, sewage pipeline, dredging pipeline, construction pipeline, etc. Q345B thick wall coiled pipe is a welded pipe product, and the process in the welded pipe is relatively simple and flexible. This type of steel pipe usually has no inventory and is processed by user. If the quantity is small, the raw materials are not good. The main problem of Q345B thick wall coiled pipe is welding. As long as it is possible, the delivery related requirements can be compared with other products.
Thick wall coiled pipe is made of steel plate. Thick wall coiled pipe can be divided into coiled pipe and thick wall coiled pipe. The wall thickness of coiled pipe is 20mm and the outer diameter is 450-3000mm. It is rolled, welded, formed, butted removed and reinforced directly from the steel plate. Coil pipe processing time is short and delivery is fast Low cost. The rolling pipe is mainly used for pipes, billboards, columns, etc.