Q345B thick wall coiled pipeNormalizing

If the particle size of straight seam coiled pipe is too small, it can not only rely on the high-strength impact of large particles of rinse agent, but also remove corrosion products with small particles. Reasonable ratio design can not only slow down the speed of pipeline and nozzle (propeller) rinse agent. Wear and tear, and the rate of rinsing agent can be greatly improved. Generally, the particle size of metal particles is 2 - 9mm, and the particle size of metal sand is 1 - 2mm, of which 3 - 5mm is a common component. The sand shot ratio is usually 4 to 9.

The function of parameters of pipe rolling equipment is improved by 30%, which fills the gap that can not be produced by traditional steel rolling equipment. It can produce steel pipes with diameter of more than 400 and wall thickness of 4-100mm. The main materials are q23q3420, 435cimo and 42cimo, 16 manganese and 16 manganese capacity. Generally speaking, cold-rolled sheet can be used for pipe rolling. Product standards: GB / t50205-200, GB / t3092-2001, etc.

.Thick wall coil production process thick wall coil production process can be divided into cold drawing, cold rolling, hot rolling and hot expansion.

The rolling pipe production technology requires that the rolling pipe weld is a double-sided weld, two longitudinal welds are allowed, and the weld spacing exceeds 300 mm. The welding appearance and quality standard shall not be lower than the level standard in the welding specification.

.The steel plate or strip is bent and then welded to form a thick wall coil. According to the welding form, it is divided into straight seam welded pipe and spiral welded pipe. It is divided into ordinary welded pipe, galvanized welded pipe, oxygen blowing welded pipe, wire sleeve, metric welded pipe rolling pipe, deep well pump pipe, automobile pipe, transformer pipe, welded thin-wall pipe, welded pipe and spiral welded pipe. Coil pipe is dedicated to the production of, longitudinal ring coil pipe and steel pressure pipe, and is modified according to similar specifications of traditional rolling equipment. The function of increasing the parameters of spiral steel pipe equipment by 30% fills the gap that the original traditional rolling equipment can not produce. It can produce steel pipes with a diameter of 400 or more and a wall thickness of 8-100mm. The material mainly includes q23 q34 20#, 16 manganese, etc. Product executive standards include: GB / t50205-2001, GB / t3092-2001, etc. The products are widely used in petroleum, chemicals, natural gas transportation, pile driving, urban water supply, heating, gas supply and other projects.

The convex hull on the surface of the crimp roll shall be treated. Before repeated processing, the equipment surface shall be treated to prevent the convex hull steel plate with abnormal roll surface from causing pits.

Service specification of coiled steel pipe: there are spiral welded pipe and seamless pipe, and the pressure resistance of gas and water is different.

The inner diameter of 1800mm steel plate coiled pipe elbow is 1800mm, the bending radius is also 1800mm, four bends, the material thickness is 4mm, chemical and electrolytic pickling are used for pickling treatment. Only chemical pickling is used for thick wall coiled pipe, which can remove oxide scale, rust and old coating. Sometimes it can be used as reprocessing after sand blasting. Although chemical cleaning can make the surface reach a certain cleanliness and roughness, its anchor lines are shallow and easy to pollute the environment. Under the action of abrasive impact and force, the steel pipe can also achieve the required uniform roughness.

The steel plate coil adopts the secondary forming process. When rolling, first bend both ends of the steel plate, and the diameter shall be less than the diameter of the coiled pipe. Then adjust the bed pressure, rolling two to three times steel pipe coiled pipe welding and strengthening the rolling pipe joint, long-term rolling pipe, Q235B coil pipe, Q345B coil pipe, large diameter heavy wall coil pipe, stainless steel coil pipe, 16MN coil pipe and other brand products, quality assurance. Then transported to the welding platform for welding.

Inspection items.Thick wall coiled pipe is a kind of familiar steel. It is widely used in construction and pipeline industry because of its durable performance and excellent quality. Have we known about the packaging process of the frequently used steel? With the development of domestic economic situation and the acceleration of welding and casting trend, the advantages of NC cutting are gradually recognized. NC cutting not only greatly improves the rate of plate and product quality, but also improves the working environment and labor efficiency. At present, the NC cutting machines used in the thick wall coil processing industry are mainly flame and ordinary plasma cutting machines,Q355b large diameter welded pipe, but pure flame cutting can not meet the needs of modern production. At present, most NC cutting machines are NC plasma cutting machines. This type of cutting machine can meet the needs of thick wall coiled pipe plate processing and thick wall coiled pipe parts processing, so the demand will be greater and greater, but there is still a very obvious gap with foreign countries, which is mainly reflected in: 90% of the developed thick wall coiled pipe processing industry is digital control cutting machine, and only 10% is manual cutting; The CNC cutting machine only accounts for part of the total blanking. 10%, of which the proportion of NC plasma cutting is small. Professional hot rolled steel pipe, large diameter thick wall rolling pipe, thick wall straight seam rolling pipe, steel casing, rolling pipe factory to ensure quality, service and quality. Your satisfaction is our pursuit! Welcome to inquire. In industrial production thick wall coil thermal cutting generally includes gas cutting, plasma cutting, laser cutting, etc. Among them, plasma cutting has a wider cutting range than gas cutting More efficient. Fine plasma cutting technology is close to laser cutting in material cutting surface quality, but the cost is much lower than laser cutting. Therefore, since the successful development of the United States in the mid-1950s, plasma cutting has developed rapidly. With the rapid development of computer and digital technology, NC cutting is also developing, which improves the machining accuracy. Save materials

The steel plate or strip is bent and then welded to form a thick wall coil. According to the welding form, it is divided into straight seam welded pipe and spiral welded pipe. It is divided into ordinary welded pipe, galvanized welded pipe, oxygen blowing welded pipe, wire sleeve metric welded pipe, rolling pipe, deep well pump pipe, automobile pipe, transformer pipe, welded thin-wall pipe, welded pipe and spiral welded pipe. Coil pipe is dedicated to the production of, longitudinal ring coil pipe and steel pressure pipe, and is modified according to similar specifications of traditional rolling equipment. The function of increasing the parameters of spiral steel pipe equipment by 30% fills the gap that the original traditional rolling equipment can not produce. It can produce steel pipes with a diameter of 400 or more and a wall thickness of 8-100mm. The material mainly includes q23 q34 20#, 16 manganese, 16 manganese capacity, etc. Product executive standards include: GB / t50205-2001, etc. The products are widely used in petroleum, chemicals natural gas transportation, pile driving, urban water supply, heating, gas supply and other projects.

Today's equipment is double-sided submerged arc welding, because it goes without saying that double-sided welding is necessary here.

Steel plate materials mainly include Q235, Q345, 20, 45, 35cimo and 42cimo, with 16 manganese and 16 manganese capacity. Generally,45# thick wall coiled pipe, cold rolled plate can be used for pipe winding. Like oil chemicals, piling and urban water supply natural gas transportation heating, gas supply and other projects can be customized! The required thickness and length can be adjusted as required! The rolling pipe weld is a double-sided weld. Two longitudinal welds are allowed, and the weld spacing exceeds 300 mm. The welding appearance and quality standard shall not be lower than the level standard in the welding specification.

Test conclusion.The inspection requirements for thick wall coiled pipe treatment are that the thick wall coiled pipe is made of steel plate. The thick wall coiled pipe can be divided into coiled pipe and hot rolled thick wall coiled pipe. Generally, the production process of thick wall coiled pipe can be divided into cold drawing and hot rolling. The production process of cold-rolled seamless steel pipe is generally more complex than hot rolling. Roll sizing test shall be carried out for the pipe blank first. If the surface does not respond to the crack, the round pipe shall be cut by a cutter and cut into a blank with a length of about meters. However, when entering the annealing process, acid shall be used for annealing, and attention shall be paid to whether a large number of bubbles are generated on the surface. If a large number of bubbles are generated, it indicates that the quality of steel pipe can not meet the response standard. In appearance, the cold-rolled seamless steel pipe is shorter than the hot-rolled seamless steel pipe, and its wall thickness is generally smaller than that of the hot-rolled seamless steel pipe, but the surface is brighter than that of the thick wall seamless steel pipe. There is not too much roughness on the surface, and there are not too many burrs in the diameter. The thick wall coiled pipe is a powerful manufacturer, quotation, honest operation, genuine and of the same quality. The thick wall coiled pipe is available from stock, with complete specifications,. The wall thickness of coiled pipe is 20mm and the outer diameter is 450-3000mm. It is rolled welded, formed, butted, large-diameter thick wall coils are factory painted with marks, and large-diameter thick wall coils are in stock. According to this, the process parameters are adjusted at any time to eliminate defects in time.

Weight per meter of steel plate coil = (outer diameter wall thickness) * wall thickness * 0.0246615 steel plate coil is made of steel plate. Thick wall t-welded coil can be divided into coil and hot rolled thick wall coil.

.Because the coiled steel pipe plays an important role in construction, railway construction and bridge construction, its quality standards are also more important. If you don't understand the quality specifications and standards, it is easy to have an impact. Generally, we can purchase from these aspects.

Compared with seamless steel pipe, thick wall rolling pipe has the disadvantages of low cost, rapid delivery, breaking the fixed specification of seamless steel pipe, etc. Thick wall coiled pipe is made of steel plate or steel strip by bending and then welding. According to the weld form, it is divided into straight welded pipe and spiral welded pipe. According to the purpose, it is divided into general welded pipe, galvanized welded pipe, oxygen blowing welded pipe, wire sleeve, metric welded pipe, idler pipe, deep well pump pipe, automobile pipe, transformer pipe, electric welding thin-wall pipe, electric welding special-shaped pipe and spiral welded pipe. Rolling pipe is committed to producing all kinds of rolling pipes and steel penstocks with circumferential seam and longitudinal ring, and is reformed on the basis of similar specifications and models of traditional rolling equipment. The function of improving the parameters of the rolling and welding steel pipe equipment by 30% fills the gap that the original traditional rolling equipment can not produce. It can produce steel pipes with diameter of more than 400 and wall thickness of 8-100mm. Materials mainly include q23 q34 20#, 16 manganese, 16 manganese capacity, etc. Product executive standard: GB / t50205-200, GB / t3092-2001, etc. The products are widely used in petroleum, chemical industry natural gas transportation, pile driving and urban water supply, gas supply and other projects.

Thick wall coiled pipe is made of steel plate. Thick wall coiled pipe can be divided into coiled pipe and thick wall coiled pipe. The wall thickness of coiled pipe is 20mm and the outer diameter is 450-3000mm. It is rolled, welded, formed, butted, billboards, columns, etc.