Q355b straight seam welded pipeFair Use Code

It has advantages and quality. The weld reinforcement obtained is increased, the weld formation is deteriorated and the edge transition is poor.

Let me introduce the standard coil produced by steel plate. In the process of rolling, the surface of the circuit board should be protected from damage. Parts with severe scars shall be ground to achieve transition, and the wall thickness of the ground part shall not be less than the design wall thickness.

.Outer diameter scale of coiled pipe - mm. Coil pipe is widely used: oil cylinder, hydraulic, bridge,Q345B reel, roller, etc. The rolling pipe is rolled, welded, formed, de reinforced, flaw detected and delivered under the condition of steel plate heating. Sometimes the wall with relatively thick thickness needs secondary heating. It is characterized by small outer diameter and uniform wall thickness. First and foremost, the coiled tube will not damage the function of raw materials. The disadvantages of rolling pipe are long processing time and high cost.

The wall thickness of general coiled pipe is 20mm and the outer diameter is 450-3000mm. It is made of steel plate by direct rolling, welding and forming. The production process of general thick walled coiled pipe can be divided into cold drawing and hot rolling. The production process of cold rolled seamless steel pipe is generally more complex than hot rolling. Roll sizing test shall be carried out for pipe blank first. If there is no response crack on the surface, the round pipe shall be cut by cutting machine, Cut into blanks about meters in length. However, when entering the annealing process, acid shall be used for annealing, it indicates that the quality of steel pipe can not meet the response standard. In appearance, the cold-rolled seamless steel pipe is shorter than the hot-rolled seamless steel pipe, and its wall thickness is generally smaller than that of the hot-rolled seamless steel pipe, but the surface is brighter than that of the thick wall seamless steel pipe. There is not too much roughness on the surface, and there are not too many burrs in the diameter. The thick wall coiled pipe is a powerful manufacturer, quotation, honest operation, genuine and of the same quality. The thick wall coiled pipe is available from stock, with complete specifications,. Docking and strengthening. Coil pipe processing time is short and delivery is fast Low cost. The rolling pipe is mainly used for pipes, billboards, etc.

.Cold rolled thick wall continuous pipe is similar to cold rolled thick wall continuous pipe, with wall thickness of 20mm and outer diameter of 450-3000mm. Steel plate is directly rolled, welded, formed, butted and reinforced. Cold rolled thick wall pipe has the characteristics of short processing time, fast delivery and low cost. Cold rolled thick wall pipe is mainly used for: pipe, billboard column, etc.

The misalignment of butt weld of coiled pipe shall not exceed 20% of wall thickness and shall not exceed 2mm. Butt joint of two pipes with small adjacent deviation value.

The offer is in progress. Welcome new and old customers to consult. Prevent surface damage of steel plate. Thick wall coil and large diameter coil are mainly made of carbon steel, Q19 q23 q34 16Mn etc. coil is a kind of welded pipe product with simple and flexible process. If the length required by the customer is special, two or more steel pipes must be connected. Therefore, the process of this welded pipe is flexible, convenient and applicable. The disadvantage is that it can not be produced by mechanized line. The level of automation and mechanization is not high, which requires a lot of manual processing. The main problem of coiled pipes is welding. Thick wall coiled pipes can be delivered as long as they can be inspected by flaw detection. The relevant requirements are broader than other products.

In fact, the surface pit of the coiled pipe is almost caused by the sparse iron oxide scale on the surface of the steel plate. In general, we can apply the following methods for prevention.

The purpose of pipe end sizing is to reduce the ellipticity of thick wall coiled pipe and ensure the dimensional accuracy of thick wall coiled pipe after machining. It is mainly used for oil casing. The number of casing after end sizing is less, and the number of missing threads on the end can improve the yield.

The main materials are q23q3420, 435cimo and 42cimo, 16 manganese and 16 manganese capacity. Generally, cold rolled sheet can be used for pipe rolling, and the product standards are GB / t50205-200, GB / t3092-2001, etc. Continuous pipe is widely used in petroleum, chemical industry, natural gas transmission, pile driving, urban water supply, heat supply, gas supply and other projects.

total cost.Before starting up, it is necessary to check whether the hot coil machine operates normally and fill the oil hole with oil.

The thickness of thick wall coiled pipe is generally greater than 20mm, and the outer diameter range is 450-3000mm. The thick wall coiled pipe is rolled under the condition of steel plate heating Welding, forming, rib defect detection, factory. Sometimes the wall thickness is relatively thick and secondary heating is required. The feature is that the outer diameter tolerance is small Uniform wall thickness.

Profiled seamless steel pipe is the general name of API seamless steel pipe with other section shapes except circular pipe. According to the shape and size of steel pipe cross section, it can be divided into profiled seamless steel pipe with equal wall thickness (code D), profiled seamless steel pipe with unequal wall thickness (code BD) and profiled seamless steel pipe with variable diameter (code) Special shaped seamless steel pipe is widely used in various structural parts, tools and mechanical parts. Compared with circular pipe, special-shaped pipe has large moment of inertia and section modulus, and has large bending and torsion resistance, which can greatly reduce the structural weight and save energy

The wall thickness of hot coil thick wall continuous pipe is generally greater than 20mm, welded,45# welded steel pipe, formed, reinforced, flaw detected and delivered under the condition of steel plate heating. Sometimes the wall thickness is very special and needs secondary heating. It is characterized by small outer diameter tolerance and uniform wall thickness. The main reason is that the hot rolled thick wall continuous pipe will not damage the performance of raw materials. The disadvantages of hot rolled thick wall continuous pipe are long processing time and high cost. Hot rolled thick wall pipe is widely used: oil cylinder, hydraulic, bridge, roll, etc. Compared with seamless steel pipe, thick wall continuous pipe has the disadvantages of low cost, fast delivery, breaking the fixed specification of seamless steel pipe and so on. Thick wall coil is welded by bending steel plate or steel strip. According to the weld form, it is divided into straight welded pipe and spiral welded pipe. It can be divided into ordinary welded pipe, galvanized welded pipe, oxygen blowing welded pipe, wire sleeve, metric welded pipe, idler pipe, deep well pump pipe automobile pipe, transformer pipe, welded thin-wall pipe, development and service. It has long been specialized in hot-rolled steel pipe, large-diameter thick wall rolling pipe, thick wall straight seam rolling pipe, steel casing and rolling pipe factory. Continuous pipe is committed to producing all kinds of circumferential seam and longitudinal circumferential continuous pipe and penstock, and is reformed on the basis of the same specification and model of traditional rolling equipment. The function of parameters of coil welded steel pipe equipment is improved by 30%, which fills the gap that can not be produced by traditional rolling equipment. It can produce steel pipes with diameter of more than 400 and wall thickness of 8-100mm. The main materials are q23 q34 20, 16Mn, 16Mn, etc. the product standards are GB / t50205-200, GB / t3092-2001 etc. the products are widely used in petroleum, chemical industry, natural gas transmission, pile driving, urban water supply, heating, gas supply and other projects.

packing.Hot rolled steel pipe is a kind of thick wall steel pipe rolled under the condition of heating the steel plate.

Whether the hot coil thick wall pipe rolling machine operates normally, and fill oil into the oil hole.

Meet the following requirements: 1. The longitudinal joint of butt joint shall not be greater than 10% of the wall thickness plus 2mm, and shall not be greater than 3mm. 2. The longitudinal joint of joint 200mm away from the pipe end shall not be greater than 2mm. 3. Other parts shall not be greater than 1mm. 4. The vertical deviation between the end face of coiled pipe and the center line shall not be greater than percent of the outer diameter of pipe and shall not be greater than 3mm. The straightness deviation shall not exceed 1mm / m. 5 the weld cannot be double-sided molded coiled pipe. When the nominal diameter is greater than or equal to 600mm, it is recommended to seal and seal in the pipe. In order to obtain better uniform cleanliness and roughness distribution, the particle size and proportion design of rinse agent is very important. The roughness is too large, which may cause the anti-corrosion layer to become thinner at the peak of the cloud path. At the same time, because the cloud path is too deep, bubbles are easy to form in the process, which seriously affects the performance of the layer.

.Compared with seamless steel pipe, thick wall rolling pipe has the disadvantages of low cost, rapid delivery, breaking the fixed specification of seamless steel pipe, etc. Thick wall coiled pipe is made of steel plate or steel strip by bending and then welding. According to the weld form, it is divided into straight welded pipe and spiral welded pipe. According to the purpose, it is divided into general welded pipe, galvanized welded pipe, wire sleeve, metric welded pipe, idler pipe, deep well pump pipe,Q235B thick wall coiled pipe, automobile pipe, electric welding thin-wall pipe, electric welding special-shaped pipe and spiral welded pipe. Rolling pipe is committed to producing all kinds of rolling pipes and steel penstocks with circumferential seam and longitudinal ring, and is reformed on the basis of similar specifications and models of traditional rolling equipment. The function of improving the parameters of the rolling and welding steel pipe equipment by 30% fills the gap that the original traditional rolling equipment can not produce. It can produce steel pipes with diameter of more than 400 and wall thickness of 8-100mm. Materials mainly include q23 q34 20#, 16 manganese capacity, GB / t3092-2001 etc. The products are widely used in petroleum, chemical industry, natural gas transportation, pile driving and urban water supply, heating, gas supply and other projects.

During the plate crimping process, the steel plate can be sandblasted to eliminate the iron oxide scale on the surface of the steel plate and ensure the raw materials on the cylinder surface during the processing process.

Move the steel pipe twice to weld and reinforce the rolled pipe joint and then transport it to the welding platform for welding.