Lixiaautoclaved aerated concrete block,advisory

test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.

　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete (9 - Terminology of bricks and blocks 3 Product classification 1 Specifications: The specifications and dimensions of the blocks are shown in Table

Lixia.　　 When laying aerated bricks the distance between the bottom of the wall needs to be filled with small solid bricks, A0, A5, A5, A0, A5, and A

.　　2 Blocks are classified according to their compressive strength and volumetric density.

　　4 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level specification size, product grade, and standard number.

　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements,Lixiaaerated block brick, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.

　　as the main raw materials, with an appropriate amount of aerating agent, regulator bubble stabilizer added, and processed through batching, mixing, pouring, static stopping,Lixiaautoclaved aerated concrete block,, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　It can preserve the strength of concrete while reducing its own weight, thereby reducing the load on the entire building. According to professionals

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.

how much.　　as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added, and processed through batching mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　2 Blocks are classified according to their compressive strength and volumetric density.

　　as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　There are six levels of volumetric density: B03, B04, B05, B06, B07,Lixia block,, and B0

Create brilliance.　　4 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level, specification size, product grade, and standard number.

　　 When laying aerated bricks, it is necessary to make batches of poles according to the height of the bricks, and then erect them at the corners of the wall

　　There are seven strength levels: A0, A0, A5, A5, A0, and A

Lixia.　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, and all parties using this standard should explore the possibility of using the latest versions of the following standards.

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.

　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.