Xingtai Qingheautoclaved aerated concrete block,Eight key operating procedures

　　There are six levels of volumetric density: B03, B04, B06, B07, and B0

　　3 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).

Xingtai Qinghe.　　 When laying aerated bricks, and then erect them at the corners of the wall

　　as the main raw materials, with an appropriate amount of aerating agent regulator, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

.　　as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　3 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).

　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.

　　as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added, and processed through batching, mixing pouring, static stopping, cutting,Xingtai Qinghe block,, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　When deformation occurs, it will not damage the internal structure. In addition, during vibration, due to the inertia force of the aerated brick

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.

Analysis project.　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.

　　There are six levels of volumetric density: B03, B04, B05, B06 B07, technical requirements, test methods,Xingtai Qingheautoclaved aerated concrete block,,Xingtai QingheAerated block, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.