WroclawElectric passenger liftWhere is the bottom of the fall

Tank oil temperature protection: When the oil temperature in the tank exceeds the standard setting value, the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops

The full height landing door should meet the following requirements: the net height of the landing door opening should not be less than 0m. In special circumstances,WroclawElectric hydraulic folding elevator, when the net height of the building entrance is less than 0m, it is allowed to lower the height of the lower door opening, but in any case, the net height of the lower door opening is not less than 8m. (Article 1 of GB26557-2011)

Wroclaw.The use of fully autonomous electric elevators can create more benefits and ensure safety in all aspects.

Setting requirements: The verticality deviation of the installation of the guide rail frame of the construction electric elevator should comply with the requirements of the user manual and specifications, as specified in the above table.

.The quality of the standard section should comply with the product manual and specification requirements.

Construction electric elevators outside the lightning protection range

Safety grounding device. In order to protect against electrical equipment. The metal casing of electrical equipment and the metal structure of electric elevators should be equipped with a safety grounding device. The grounding wire should operate multiple wires, and the neutral wire should not be arbitrarily held as a safety grounding wire. Its grounding resistance should not exceed 4 ohms; The power supply of the electric elevator can be cut off.

Setting requirements: The installation and dismantling workers, electricians, and other operators of construction electric elevators should have special construction operations.

There is a certain itinerary.

In addition to ground protective fences, a half height middle crossbar, and a toe board at least 150mm above the ground.

Credit guarantee.Protective measures should comply with regulatory requirements.

The quality of the standard section should comply with the product manual and specification requirements.

Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.

Model Example: Hanging Cage Specification: LABSC200/200TD3200x1500 Type I: 2900~3600 Type II: 2900~3600 Type V: 1800~250044003800 Technical Requirements: The load-bearing capacity of the foundation should be greater than P: P=(hanging cage weight+outer cage weight+total weight of guide rail frame+counterweight+load) x0.02 (kN).

Test conclusion.The setting of the cable guide frame should comply with the user manual and regulatory requirements.

Construction electric elevators should be equipped with travel limit switches, as follows: automatic reset type upper and lower limit switches should be installed on construction electric elevators, but the upper and lower limit switches should not be triggered as high

During the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, and record the inspection results.

Wroclaw.There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.

Acceptance: Concrete strength grade C30, strength testing report.

In order to meet the needs of contemporary audiences and achieve perfect effects, in addition to lighting and sound, stage machinery is particularly important on the stage. On the stage,Wroclaw500kg electric elevator, suspension points, lighting bridges, lighting suspension cages and fire curtains. Under the stage,Wroclaw200 kg portable electric elevator, there are lifting platforms, car platforms, turntables, and lifting orchestras. Some lifting platforms are equipped with turntables, or there are lifting platforms in the turntables. Various types of lifting platforms are equipped in professional opera houses, dance theaters, drama theaters, and many internationally renowned music halls. It has the functions of quickly changing scenery, meeting the needs of stage craft layout meeting the needs of stage design and choreographers, creating special atmosphere and effects, and changing the stage form according to the needs of the performance.