OkeSelf propel
OkeHydraulic uRegularly check whether the operation of each mechanism is normal and whether there is any noise. If any faults are found, they must be promptly eliminated.
The current fixed hydraulic elevators are mainly enclosed or meshed lifting channels surrounded by buildings and light steel structures, and use hydraulic cylinders to lift the platform. Its main components are as follows: the lifting passage part: a closed or mesh frame surrounded by buildings or light steel structures, a fixed hydraulic lifting platform with steel guide rails installed on both sides of the internal driving part: it is equipped with hydraulic driving motors, oil pumps, fixed hydraulic lifting platform speed control valves The small oil tank cylinder part of hydraulic components such as directional valves: composed of one or more cylinders of a lifting cylinder, a straight top platform, or a lifting shear fork frame, forming a door system. The closed or mesh platform door or door system consists of a steel structure, with manual and automatic doors. Generally open platforms do not have doors. The electrical part is composed of power, signal, lighting, and other devices. The platform part is a steel structure platform that carries heavy objects, There are enclosed (i.e. cabin type) or open types, with guide rollers or guide shoes on both sides. The platform bottom can be connected to the lifting cylinder or lifting scissor type steel frame auxiliary parts, which are composed of hydraulic pipe fittings, pipelines, pressure gauges and steel structure bases; Safety devices: safety valves, limit limits,OkeVehicle mounted hydraulic lift platform, door electromechanical interlocking, rupture valves, emergency switches, and electrical short circuit protection.
Oke.Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
Staying below high-altitude work sites is prohibited, and safety nets or other protective devices should be installed below the work site to avoid injury from falling objects.
.Update Log
Convert to Simplified Chinese Convert to Traditional Chinese without converting the number of blank lines between paragraphs before and after:
Using Help | Updating Logs | Original Software | Daily Software
Regularly check the connection of each part, and tighten it if there is any looseness
The above detailed introduction, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators, and these details cannot be ignored during the use process.
When conducting high-altitude operations on dangerous edges such as roofs, suspension bridges, slopes, or cliffs, guardrails or safety nets should be installed on the side facing the air, or safety belts or ropes should be used.
market price.The hook of the seat belt should not be hung on unstable or moving objects.
For customers to use and operate the lifting platform for a long time, the editor briefly introduces how to maintain and repair the lifting platform: First of all, normal maintenance is mainly focused on prevention, especially if any damage or malfunction is detected and corrected or repaired in a timely manner. Careful inspection and maintenance at this time can save costs and avoid larger problems, resulting in costly repairs.
There are many options for highlight styling. In fact, although types of lifting equipment can also bring certain effects during use, their design is relatively limited. Basically, the styles and shapes of lifting equipment in the market are similar. And aluminum alloy elevators are different because the plasticity of aluminum alloy materials is very strong. In the production process, it can also well meet some complex styling needs. The lifting equipment processed in this way will naturally have good sales in the market. After all, it has a wide range of styling options and can well meet the needs of different customers.
Because hydraulic elevators have the function of automatic and flexible lifting, they can provide protection for the safety of the campus and surrounding areas. Hydraulic elevators have many advantages, which makes it easy to maintain their lifting speed. This is also determined by the reliability or durability of hydraulic methods. Of course, it also has no blind spots and is sturdy and reliable during normal use. The important thing is that the possibility of compression and collision resistance is relatively small, so it is very convenient to use, and it is beautiful and durable. Among them, with the characteristics of flexibility reliability, and collision resistance.
Excellent service.The elevator has undergone strict testing before leaving the factory. If the pressure regulating valve is adjusted arbitrarily by non manufacturers, it may cause abnormal system operation. Non professionals should not adjust the pressure regulating valve arbitrarily!
The electric lifting platform needs to work under load according to the regulations on the nameplate during use, but overloading is strictly prohibited during use. Especially in emergency situations,OkeHydraulic lifting platform fixed hydraulic platform, it can only briefly overload by 10%.
Head signature:
Oke.Using Help | Updating Logs | Original Software | Daily Software
Replace with
Secondly,OkeLuxury hydraulic lifting platform, for the replacement of hydraulic oil on the lifting platform, it is recommended to replace it every three months. If the frequency of use is not high it can be replaced once a year. The hydraulic oil must be clean, and after changing the hydraulic oil, it must be automatically lifted and lowered 2 to 3 times to ensure that the air in the oil cylinder is completely discharged, maintain sufficient space, and ensure that the lifting platform can be lifted to the rated lifting height.