Jinan block,Fair Use Code

　　4 Block product marking: Mark in the order of product name (code ACB), strength level, specification size, product grade, and standard number.

　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete (9 - Terminology of bricks and blocks 3 Product classification 1 Specifications: The specifications and dimensions of the blocks are shown in Table

Jinan.　　Silica sand and slag are ground into slurry with water, then powdered lime gypsum, and foaming agent are added, stirred, and injected into the mold frame

　　4 Block product marking: Mark in the order of product name (code ACB), strength level, specification size, product grade, and standard number.

.　　There are six levels of volumetric density: B03, B04, B05, B06, B07, and B0

　　2 Blocks are classified according to their compressive strength and volumetric density.

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.

　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements,Jinanautoclaved aerated concrete block,, test methods, inspection rules, product quality instructions, stacking,Jinanaerated block brick, and transportation of autoclaved aerated concrete blocks.

　　Very small, with very good seismic performance.

　　as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added, and processed through batching, mixing pouring, static stopping cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, strength level, bulk density level, specification size, product grade, with an appropriate amount of aerating agent, regulator, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.

　　There are six levels of volumetric density: B03, B04, B05, B06, B07, and B0

Workshop cost.　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.

　　Aerated blocks also known as aerated bricks, aerated blocks, aerated concrete blocks, autoclaved aerated concrete blocks, and aerated concrete blocks

　　There are seven strength levels: A0, A0, A5, A5, A0, A5, and A

Jinan.　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.

　　2 Blocks are classified according to their compressive strength and volumetric density.

　　There are six levels of volumetric density: B03, B04,JinanAerated block, B05, B06, B07