OkeAluminum alOn the friction surface, there should be no dirt present, and any dirt must be washed off with gasoline or thinner.
The surface of each part of the brush should be kept clean, and the brush pressure should be adjusted to ensure that its area is not less than 50%.
Oke.A self-developed integrated built-in slider is used between each mast to minimize the dynamic gap between the masts.
Secondly frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
.Method: Check if the hydraulic oil in the mailbox is sufficient; Check if the oil filler cap of the fuel tank is excessively sealed, causing difficulty in oil pump suction. Check if the connection of the oil pump suction pipeline is loose to prevent air from the oil pump; Check whether the motor, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions. Air, check whether the motor, cover, etc. are displaced, whether the fixing screws are loose, and whether the ambient temperature of the equipment used meets the specified usage conditions.
Therefore, using a stable voltage for aluminum alloy elevators is crucial for safe operation. Aluminum alloy elevators have high stability, a wide working platform, and a high load-bearing capacity, making high-altitude operations more efficient and safe. To avoid the harm of voltage instability, please ensure voltage stability.
Hydraulic lifting platform products are divided into curved arm hydraulic aluminum alloy elevators, scissor fork hydraulic aluminum alloy elevators, mast hydraulic aluminum alloy elevators, and straight arm hydraulic aluminum alloy elevators according to their working modes. Hydraulic aluminum alloy elevator is a replacement product of folding arm aluminum alloy elevator (lifting platform) and scissor fork aluminum alloy elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades, or the installation and maintenance of power systems. This aluminum alloy elevator has the advantages of light weight, self-propelled walking, electric starting, self supporting legs simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.
The lifting product has a sturdy structure, large load-bearing capacity, stable lifting, making it an ideal economic and practical cargo conveying equipment for replacing elevators between low floors. If the required size is large, a fixed double span hydraulic lift can be used. The double span lift is stable, has a large bearing capacity, and is easy to operate. It is widely used in industries such as vehicle maintenance,OkeTilting aluminum alloy elevator, kilns, and equipment matching.
Vehicle mounted (diesel) aluminum alloy elevator is a high-altitude work equipment installed on the car. It is composed of specialized chassis working arm frame, flexible device three-dimensional fully rotating mechanism, hydraulic system, electrical system, and safety device. A specialized equipment for high-altitude operations that is modified from a combination of elevators and vehicles. It utilizes the car engine or the original DC power of the car, without the need for external power supply, and can travel and drive the lifting platform. It is easy to move, has a wide range of operation flow, and the product is pollution-free, exhaust free, has a wide range of operation, and has strong mobility. Especially suitable for cold storage and densely populated areas (train stations, bus stations, airports). Widely used in industries such as urban construction, oil fields, transportation, and municipal administration. According to personal requirements safety devices such as emergency lowering devices, balance valves, and automatic pressure maintaining devices can be installed in case of power outage, as well as safety devices to prevent overloading of high-altitude lifting platforms, leakage protection devices, phase loss protection devices, but there is&quo; in the electrical box when the up button is pressed; Clacking sound&rdquo, Does the platform not rise or can only rise to a limited height?
Development Curriculum.After working for 10000 hours, the mechanical and electrical systems of the elevator will be overhauled.
Working on an aluminum alloy elevator workbench. Must wear safety belts, helmets, and other tools to prevent accidents.
Hydraulic lifting platforms can be divided into: four wheel mobile,OkeProfessional aluminum alloy elevator, two wheel traction,OkeAluminum alloy lifting machine table, car modification, auxiliary self-propelled, and lifting heights ranging from 4 meters to 18 meters. This series of products has a load capacity of 0.1 to 0.8 tons, and can also be customized according to user requirements, with a high load capacity of up to 10 tons.
Regularly check the connection of each part and tighten it if there is any looseness. The tightness of the body connecting bolts should be checked when the body is under pressure (the rotating arm can be used to cause compression), and all connecting shafts must have split pins and be sufficient. Professional items
Process inspection.Aluminum alloy elevators are a product of modern high-altitude operations. During their development, the performance and quality of aluminum alloy elevators have continuously strengthened, becoming the main force of modern high-altitude operations. So, without the need for manual traction or external power supply. It is flexible and convenient to move, making high-altitude work more convenient and efficient. It is an ideal high-altitude work equipment for modern enterprise safety production. Able to walk quickly and slowly under different working conditions, simply
The lifting product has a sturdy structure large load-bearing capacity, stable lifting, simple and convenient installation and maintenance, a fixed double span hydraulic lift can be used. The double span lift is stable, has a large bearing capacity, and is easy to operate. It is widely used in industries such as vehicle maintenance, kilns, and equipment matching.
Oke.The contact opening and closing of the travel switch of each safety device must be reliable, and the contact crater should be polished in a timely manner.
Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
Is the power source noise abnormal during the lifting process of the aluminum alloy elevator?