which can make the thick wall coiled pipe as smooth as new for a long time and reduce the external corrosion to it. It can also increase its sealing performance and ensure that there will be no problems when transporting fluid. In addition, it has moisture-proof performance, uses antirust oil to isolate the direct air of thick wall welded pipe, so it has little chance of being changed by the external situation, which increases its stable performance and safer use.
The influence of welding process parameters mainly includes two aspects: according to the production characteristics of spiral steel pipe, the welding current is usually smaller for internal welding and larger for external welding. However, under the condition of large welding current, the stirring effect of molten pool is intensified, and the melting amount of welding wire is also the same
.The butt joint of strip steel head and tail adopts single wire or double wire submerged arc welding, and automatic submerged arc welding is adopted for repair welding after rolled into steel plate and pipe.
The effect of antirust oil on thick wall coiled pipe is antirust effect, which can make the thick wall coiled pipe as smooth as new for a long time and reduce the external corrosion to it. It can also increase its sealing performance and ensure that there will be no problems when transporting fluid. In addition, it has moisture-proof performance, uses antirust oil to isolate the direct air of thick wall welded pipe, so it has little chance of being changed by the external situation, which increases its stable performance and safer use.
.Weld size has a great influence on the quality of rolled steel pipe. Weld size mainly includes welding process parameters, welding wire shape and position parameters,Q460b large diameter welded pipe, flux flow flux process performance and weld forming.
The butt joint of coiled pipe (with the same wall thickness) shall not exceed 10% of the wall thickness and not more than 2mm.
Columns for bearing steel structures such as offshore platforms, super long-span building structures and electric pole tower and mast structures requiring wind resistance and earthquake resistance. Inspection equipment maintenance and packaging strategy: 16Mn thick wall coil adopts PLC automatic system,Q550b reel, and all parts of Shenzhen thick wall coil focus on panel operation. The cutting length of 16Mn thick wall coil adopts photoelectric induction, accurate positioning and automatic cutting. Each working process adopts double pump oil pressure system, which runs smoothly, Shenzhen thick wall coiled pipe has good cutting synchronization performance. 16Mn thick wall coiled pipe has different application ranges: length: 0-1400mm, thickness: 2-15mm, diameter: 20-200mm, application: 3 inches x2 4x, application voltage: 380V 50Hz. It is used according to the specified parameters and range to ensure that it can play an important role and value in use. The packaging process of new product 16Mn thick wall coil includes main processes such as filling, wrapping and sealing, as well as related pre and post processes, such as cleaning, stacking and disassembly. The process of 16Mn thick wall rolling pipe shall be strict, and it shall be produced in the correct way and principle. In addition, the process of 16Mn thick wall coiled pipe also includes measuring or stamping on the package. The use of mechanical packaging products can improve productivity, reduce labor intensity, meet the needs of large-scale production, d7z3xjb87v21w and meet the requirements of cleanliness and hygiene. The production process of rolling pipe is round pipe blank → Heating → Perforation & rarr; Roll cross rolling, continuous rolling or → Off pipe & rarr; Sizing (or reducing) → Cooling → Straightening & rarr; Hydrostatic test (or flaw detection) → Mark & rarr; According to different production, warehousing supply indicators can be divided into hot-rolled pipe, cold-rolled pipe cold drawn pipe, pipe, etc. quality management? Hot rolled seamless tubes are produced on the automatic tube rolling mill. The solid tube blank is cut into the required length by removing the surface defects. The Shenzhen coiled tube is centered on the end face of the perforated end of the tube blank, and then sent to the heating furnace for heating. It is perforated on the piercing machine. At the same time, it rotates and advances continuously. Under the action of the roll and top head, a cavity called rough tube is gradually formed inside the tube blank, Then it is sent to the automatic pipe mill for continuous rolling, and the wall thickness is adjusted by the whole machine. The Shenzhen coiled pipe is sized by the sizing machine to meet the specification requirements. The production of hot-rolled seamless steel pipe by the continuous pipe mill is relatively advanced. If you want to obtain seamless pipe with smaller size and better quality, 888yixtfrfsbu Shenzhen coil pipe must be cold rolled and cold drawn or a combination of the two. The cold rolling is usually carried out on the roll mill. The steel pipe is rolled in the annular pass composed of variable section circular hole groove and fixed conical plug. The cold drawing is usually carried out on the single chain or double chain cold drawing machine, that is, and the perforated rod and rod move, large-diameter thick wall rolling pipe, thick wall straight seam rolling pipe, steel casing, rolling pipe factory has advanced technology, strict testing, more affordable price and more preferential. Welcome to consult. Make the parts extruded from the smaller die hole. This method can produce the steel pipe with smaller diameter. Work course standard requirements & amp; amp; quot;Standard requirements: the Executive Standards of hot-rolled thick wall coil product line are: GB / t50205-200, GB / t3092-2001, etc.
It is important that the thick wall coiled pipe will not damage the performance of raw materials. The disadvantage of hot roll thick wall rolling pipe is that the treatment time is long Very expensive. Thick wall rolling pipe is widely used: cylinder, hydraulic, bridge, roller, etc.
Material used for steel rolling pipe: it is required to be explained by the user.
API seamless steel pipe is expressed as outer diameter wall thickness and thick wall seamless steel pipe, which is mainly used for machining, coal mine, hydraulic steel and other purposes. Classification of thick wall seamless steel pipe & mdash& mdash; Hot rolled thick wall seamless steel pipe, cold rolled thick wall seamless steel pipe, thick wall seamless steel pipe, stainless steel seamless steel pipe for pipe jacking structure (GB / t14975-199) are widely used in corrosion-resistant pipes and structural members in chemical, petroleum, light textile, food, machinery and other industries, and stainless steel hot rolled (,) and cold drawn (rolled) Seamless stainless steel pipe for fluid transportation (GB / t14976-199) is a hot-rolled (extruded) and cold drawn (rolled) seamless steel pipe made of stainless steel for fluid transportation.
resources.Generally, the wall thickness of the coiled pipe is 20mm and the outer diameter is 450-3000mm. It is directly welded, formed, rolled, butted, removed and reinforced from the steel plate. The coil pipe has the advantages of short processing time, fast delivery and low cost. The rolling pipe is mainly used for pipes, billboards, etc.
Deviation reel as follows (unit: mm): nominal diameter & amp; amp; lt; 800 800 to 1200 1300 to 1600 1700 to 2400 2600 to 3000 perimeter Deviation & plusmn; 5± 7± 9± 11± The ovality is 1% of the outer diameter, and the quality of no more than 4 steel plate coils is greatly affected by the weld size, mainly including the comprehensive factors such as welding process parameters, welding wire shape and position parameters, flux flow, flux process performance and formed joint.
API seamless steel pipe is expressed as outer diameter, wall thickness and thick wall seamless steel pipe, which is mainly used for machining, coal mine, hydraulic steel and other purposes. Classification of thick wall seamless steel pipe & mdash& mdash; Hot rolled thick wall seamless steel pipe, cold rolled thick wall seamless steel pipe, cold drawn thick wall seamless steel pipe, thick wall seamless steel pipe stainless steel seamless steel pipe for pipe jacking structure (GB / t14975-199) are widely used in corrosion-resistant pipes and structural members in chemical, petroleum light textile, food, machinery and other industries, and stainless steel hot rolled (,) and cold drawn (rolled) Seamless stainless steel pipe for fluid transportation (GB / t14976-199) is a hot-rolled (extruded) and cold drawn (rolled) seamless steel pipe made of stainless steel for fluid transportation.
With the development of domestic economic situation and the acceleration of welding and casting trend, the advantages of NC cutting are gradually recognized. It has long provided various brand products such as hot-rolled steel pipe, large-diameter thick wall rolling pipe, thick wall straight seam rolling pipe, the NC cutting machines used in the thick wall coil processing industry are mainly flame and ordinary plasma cutting machines but also improves the working environment and labor efficiency. At present, but pure flame cutting can not meet the needs of modern production. At present, most NC cutting machines are NC plasma cutting machines. This type of cutting machine can meet the needs of thick wall coiled pipe plate processing and thick wall coiled pipe parts processing, so the demand will be greater and greater, but there is still a very obvious gap with foreign countries, which is mainly reflected in: 90% of the developed thick wall coiled pipe processing industry is digital control cutting machine, and only 10% is manual cutting; The CNC cutting machine only accounts for part of the total blanking. 10%, the thermal cutting of thick wall coiled pipe generally includes gas cutting, plasma cutting, laser cutting and so on. Among them, plasma cutting has a wider cutting range than gas cutting More efficient. Fine plasma cutting technology is close to laser cutting in material cutting surface quality, but the cost is much lower than laser cutting. Therefore, since the successful development of the United States in the mid-1950s, plasma cutting has developed rapidly. With the rapid development of computer and digital technology, NC cutting is also developing, which improves the machining accuracy. It shows great advantages in saving materials and improving labor productivity. This leads to the development of plasma cutting technology from manual or semi-automatic to NC which has become one of the main directions of NC cutting technology. NC plasma cutting technology is a set of high-tech technologies such as NC technology, plasma arc characteristic research, power electronics and other disciplines. The CNC cutting technology began in the 1980s, recently, some domestic universities, research institutes and manufacturers have studied NC plasma cutting technology and gradually developed and produced various specifications of NC plasma cutting equipment, narrowing the gap of foreign advanced technology.
Application process.In order to make you better understand the installation method of coiled pipe, the following coiled pipe factory will introduce the installation method of coiled pipe: pipe hoop is used, and raw silk belt, white hemp wire, pipe expander, handle and other tools are used to connect coiled pipe and pipe fittings. This method may need repeated debugging due to the great influence of human factors. In addition, when the materials of coiled pipes and pipe fittings are different,Q345B thick wall coiled pipe, due to their different thermal coefficients, leakage may occur when cold and hot water are used alternately.?
How about thick wall coiled pipe? Generally, which can remove oxide scale, rust and old coating. Sometimes it can be used as reprocessing after sand blasting. Although chemical cleaning can make the surface reach a certain cleanliness and roughness, its anchor lines are shallow and easy to pollute the environment. Under the action of abrasive impact and force, the steel pipe can also achieve the required uniform roughness.
Generally, the wall thickness of the rolled pipe is 20mm and the outer diameter is 450-3000mm. It is rolled, welded, formed, butted and rolled directly from the steel plate. It has the advantages of short processing time, fast delivery and low cost. The rolled pipe is mainly used for hot-rolled thick wall coils such as pipes, billboard and columns. The thickness of the hot-rolled thick wall coil is generally greater than 20mm and the outer diameter is 450-3000mm. The hot-rolled thick wall coil is rolled under the heating of the steel plate Welding, forming, deburring, defect detection and delivery. Sometimes the wall thickness is relatively thick and secondary heating is required. The feature is that the outer diameter tolerance is small Uniform wall thickness. It is important that the hot rolled thick wall coil will not damage the properties of raw materials. The disadvantages of hot roll thick wall rolling pipe are long processing time and. Hot rolled thick wall coils are widely used: cylinder hydraulic, bridge, roller table, etc.
.Flame cutting and plasma cutting are commonly used for sheet metal blanking in our factory. The equipment used includes manual cutting, copier, semi-automatic cutting machine and NC cutting machine. Manual blanking is arbitrarily large compared to other cuts Flexible and convenient no special supporting cutting equipment is required.
When the nominal diameter is larger than the internal seal of the pipe, and when the butt weld is flush with the pipe, it is and coiled pipe. During pipe rolling, the surface of the circuit board shall be protected from damage.
However, the disadvantages of manual cutting and cutting are also obvious, and the quality of the incision is very poor Big size error There is a great waste of materials The post-treatment process has large processing capacity and poor working conditions. Cutting with a forming machine can greatly improve the quality of the workpiece, but the workpiece must be pre machined. It is not suitable for blanking of single chip, small batch and large workpiece. Although the semi-automatic cutting machine reduces the labor intensity, its function is simple and is only suitable for cutting two shapes. Due to the low cost of equipment, the above cutting is easy to operate compared with CNC cutting Easy to operate, so even in some large enterprises, it is still widely used in small and medium-sized enterprises.