ModenaAutomatithe demand for aluminum alloy elevators is also increasing. The application of aluminum alloy elevators in every corner of our lives will bring us objective benefits.
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of aluminum alloy elevators. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes
With the continuous increase of our productivity and the continuous improvement of our lives, it must be immediately rinsed with clean water.
Modena.How to use an aluminum alloy elevator: Preparation before use: The level must be adjusted before use, otherwise it cannot be used; The elevator is not allowed to move or adjust its base during operation; Aluminum alloy series, do not overload; It is not allowed to climb or stand on the guardrail of the manned platform for operation; It should be used on a solid and flat ground, and should never be used on temporary stands, trucks (trucks, trucks, uncovered vehicles), beds, or extended surfaces; During work, no load is allowed to touch the side to prevent accidents; Support your feet as if they were on the ground, and make a solid cushion and adjust it steadily; During work, no one is allowed to stand under the manned framework; Do not tilt the use of mast type elevators, and when using high walls, the lifting height should not be greater than the height of the high wall; Before placing or erecting the support frame, it is necessary to connect the support rod to the hole on the auxiliary pin before placing or erecting it. It is necessary to operate carefully to prevent accidents.
An aluminum alloy elevator equipment consisting of a walking mechanism, hydraulic mechanism, electric mechanism, and support mechanism. The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
.Regularly check whether the operation of each mechanism is normal and whether there is any noise. If any faults are found, they must be promptly eliminated.
. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the aluminum alloy elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing and fastening screws for aluminum alloy elevators, it is necessary to use the correct diagonal first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the aluminum alloy elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the maintenance of the aluminum alloy elevator is completed the equipment maintenance record must be filled out. The maintenance record should include the equipment maintenance date,ModenaAluminum alloy platform car, the personnel participating in the maintenance, the maintenance items, the brand, model and specification of the replaced parts, the effectiveness of the maintenance, and whether the equipment still has problems after the maintenance is completed.
After 5000 hours of operation of the elevator, carry out medium maintenance on the mechanical and electrical systems.
The lifting product has a sturdy structure, large load-bearing capacity, stable lifting, simple and convenient installation and maintenance, making it an ideal economic and practical cargo conveying equipment for replacing elevators between low floors. If the required size is large, has a large bearing capacity, and is easy to operate. It is widely used in industries such as vehicle maintenance, kilns, and equipment matching.
Aluminum alloy elevators have the advantages of beautiful appearance, small size, light weight, balanced lifting safety and reliability. They are widely used in factories, hotels, stations, airports, theaters, exhibition halls, and other places. They are a good safety partner for maintenance equipment, paint decoration replacement of lighting fixtures, and other purposes. Adopting high-strength and high-quality specialized aluminum profiles, small size, light weight, balanced lifting, safety and reliability.
The lifting product has a sturdy structure, large load-bearing capacity, stable lifting, simple and convenient installation and maintenance, making it an ideal economic and practical cargo conveying equipment for replacing elevators between low floors. If the required size is large, a fixed double span hydraulic lift can be used. The double span lift is stable, has a large bearing capacity, and is easy to operate. It is widely used in industries such as vehicle maintenance, kilns, and equipment matching.
Quality documents.Test run or use completed. The aluminum alloy elevator and site must be cleaned. When closing the aluminum alloy elevator cover or other assembly cover. Items such as tools, rags, and removed parts should be checked for forgetting. After confirming that there are no errors. Only then can it be closed.
When installing, disassembling, and adjusting the rotating mechanism,ModenaFour column aluminum alloy hydraulic lifting platform,ModenaMast type aluminum alloy elevator, it is important to ensure that the centerline of the reducer of the rotating mechanism is parallel to the centerline of the gear, and its meshing surface is not less than 70%. The meshing clearance should be suitable.
Method for hydraulic oil leakage in aluminum alloy elevator: Check if the pipe joints are loose and try to tighten them. Check if the viscosity of the hydraulic oil used is too low. When checking the leakage point of the hydraulic oil system, generally, the place where hydraulic oil seeps out is the leakage point, but it is not ruled out that the leaked hydraulic oil may accumulate along the pipeline deviating from the leakage point. Therefore, it is important to carefully search during inspection. High priced aluminum alloy elevator manufacturers of various specifications welcome scrap merchants, industrial companies, enterprises, and power departments to visit and negotiate with the company!
Is the power source noise abnormal during the lifting process of the aluminum alloy elevator?
query.Method: Check the length or diameter of the power supply lead. When the wire length is not more than 25 meters, the wire diameter should not be less than 1m ²; When the wire length is not greater than 50 meters, the wire diameter should not be less than 5m ². You can try fixing the plug directly to the socket without moving the cable.
Why is the application range of aluminum alloy elevators relatively wide? The fundamental reason is that it has good corrosion resistance, but there may still be certain malfunctions during use.
Is the power source noise abnormal during the lifting process of the aluminum alloy elevator?
Modena.Introduction to aluminum alloy elevator: Aluminum alloy elevator is a fixed transportation equipment that lifts items from one height to another. Due to the large weight and volume of the lifted object it is safe and stable. It can be used as a specialized hydraulic lifting platform product for transporting goods between floors of buildings, with the main function of transporting various work floor goods up and down; At present, aluminum alloy elevators are mostly used in the market for lifting cars in three-dimensional garages and garage floors.
The standard rack free design of the lifting and lowering machine with high safety performance ensures that the platform will not fall, and the limit and limit switches further ensure the safety of construction personnel.
After working for 10000 hours, the mechanical and electrical systems of the elevator will be overhauled.