304 stainless steel pipe densityResources are significantly reduced

announcer:hp717HP127443542 release time:2021-11-29 17:45:48

The inner and outer surfaces of precision stainless steel pipe and thick wall pipe shall be free of cracks folds, crazing, cracks, rolling folds, delamination, scabs and other defects which need to be completely removed (unless they are specially used for machining) And after removing the stainless steel pipe wall, the wall thickness and outer diameter shall not exceed the negative deviation. As long as some minor surface defects that do not exceed the allowable negative deviation do not need to be removed.

The compressive strength of duplex stainless steel alloy is twice that of austenitic stainless steel. Compared with L and 317L, the designer can reduce its weight. Alloy is especially suitable for & mdash; 50° F/+600° F temperature range, it can also be used for lower temperatures. C≤ 0.030 Mn≤ 00 Si≤ 00 p≤ 0.030 S≤ 0.020 CR 20 ~ 20 Ni 5 ~ 5 mo0 ~ 5 n0.14 ~ 0.20 (AUSTENITIC FERRITIC type)

.In the building water supply pipe system, due to the end of the glorious history of galvanized steel pipe, various new plastic pipes and composite pipes have developed rapidly, but various pipes still have some deficiencies in varying degrees, relevant experts: building water supply pipes will eventually return to the era of metal pipes. According to foreign application experience, stainless steel pipe is recognized as one of the pipes with good comprehensive performance in metal pipe.

Standard provisions.

.The difference between duplex stainless steel plate and ferritic 410 stainless steel plate: the comprehensive mechanical properties are better than ferritic stainless steel, especially the plastic toughness, which is not as brittle as ferritic stainless steel.

High temperature oxidation resistance stainless steel plates have high temperature oxidation resistance, but the oxidation rate will be affected by inherent factors such as environment and product form.

2: stainless steel pipe: seamless pipe and seamless pipe (longitudinal welded pipe, decorative pipe, welded pipe, welded pipe, bright pipe). There are more than 200 kinds of standard specifications of stainless steel pipe all sizes, and the small pipe is more expensive, especially the capillary. The capillary is poor to be made of 304 material, otherwise the pipe is easy to burst. You can also customize non-standard pipes for customers. Seamless pipes are mainly used in industry, and the surface is foggy, Not bright. The surface of the slotted pipe is a bright surface, and there is a thin welding line in the pipe commonly known as welded pipe, which is mainly used for decorative materials. In addition, the pressure resistance of industrial fluid pipe depends on the wall thickness. 310 and 310S are high temperature resistant pipes. They can be used normally below 1080 degrees, and the high temperature resistance can reach 1150 degrees

304 stainless steel pipe densityResources are significantly reduced

Cold drawn (rolled) seamless steel pipe: round billet → Heating → Perforation & rarr; Lead & rarr; Annealing & rarr; Pickling → Oiling (copper plating) → Multi pass cold drawing (cold rolling) → Blank tube & rarr; Heat treatment & rarr; Straightening & rarr; Hydrostatic test (flaw detection) → Mark & rarr; Warehousing.

Standard classification 4-1 classification: national standard GB industry standard Yb local standard enterprise standard qcb4-2 classification: product standard packaging standard basic standard 4-3 standard level (divided into three levels): y level: international advanced level I level: international general level H level: domestic advanced level 4-4 national standard: stainless steel bar (level I) gb4241-84 stainless welding disc Park (level H)

Compared with traditional steel, stainless steel can not only ensure high strength and weight ratio, but also have good plasticity, toughness, formability and weldability. It is the first choice for car frame. Stainless steel with superior performance can create cars with light weight, strong resistance, high safety and long service life. Such frames can be recycled and reused. It can not only save costs, but also save resources. And some other auto parts are also made of stainless steel. Stainless steel has a great potential market in the whole automobile industry!

Word of mouth recommendation.No matter under dynamic load or static load it has higher energy absorption capacity than austenitic stainless steel, which has obvious advantages and practical application value for structural parts to deal with sudden accidents such as collision, etc. Compared with austenitic stainless steel, duplex stainless steel has the following disadvantages: its universality and versatility are not as good as austenitic stainless steel. For example, Guangdong Province in the tenth generation of the last century. With the rapid development of science and technology in recent decades, stainless steel pipe production is all over the country. Stainless steel pipe is more and more widely used. But in fact, most people, including many people in the industry, do not know much about the classification and application of stainless steel pipes. Take stainless steel pipe for example.

The difference between duplex stainless steel plate and ferritic 410 stainless steel plate: the comprehensive mechanical properties are better than ferritic stainless steel, especially the plastic toughness, which is not as brittle as ferritic stainless steel.

304 stainless steel pipe densityResources are significantly reduced

  SPHC—& mdash; In the first place, s is the abbreviation of steel, P is the abbreviation of plate, h is the abbreviation of hot heat, and C is the abbreviation of commercial. It generally represents hot-rolled steel plate and strip.

Excellent quality.Usage: widely used in automobile, tractor and other industries.

The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, tundish, nozzle and submerged nozzle.

◆ stainless steel and alloy tool steel (C content is expressed in thousandths), such as 1 thousandth of 1Cr18Ni9 (i.e., stainless C & LE); 0.08%, such as 0Cr18Ni9, ultra low carbon C & le; 0.03% if the international stainless steel mark, the American Iron and Steel Institute uses three digits to mark various standard grades of malleable stainless steel. Among them, austenitic stainless steel is indicated by numbers of 200 and 300 series, and ferritic and martensitic stainless steel is indicated by numbers of 400 series. For example, some common austenitic stainless steels are marked with 20, 30, 316 and 310, ferritic stainless steels are marked with 430 and 446, martensitic stainless steels are marked with 4420 and 440C, duplex (austenitic ferrite), stainless steels, precipitation hardening stainless steels and high alloys with iron content less than 50% are usually named by patent name or trademark.

.According to the steel structure, austenite ferrite ferrite martensite and precipitation hardening note: precipitation hardening (precipitation strengthening): refers to a heat treatment process in which the metal is hardened by the segregation zone of solute atoms in supersaturated solid solution and / or the desolved particles are dispersed in the matrix. For example, austenitic precipitated stainless steel can obtain high strength by precipitation hardening at 400 ~ 500 ℃ or 700 ~ 800 ℃ after solution treatment or cold working. That is, the supersaturated solid solution of some alloys is placed at room temperature or heated to more & amp; gt;& amp; gt;

For the length of welding arc, 2 ~ 4mm is better for ordinary steel welding, the protection effect is not good.

For the manual clamping tool, the upper and lower jaw are fixed modules, and the pressure is set to output a constant pressure of 50MPa. The detection standard is to observe the seam of the upper and lower jaw and press it once or twice.