Q355b welded steel pipeThe main style features

announcer:hp709HP180518493 release time:2022-01-17 19:15:27

Generally, the wall thickness of the coiled pipe is 20mm and the outer diameter is 450-3000mm. It is directly welded, formed, rolled, butted, removed and reinforced from the steel plate. The coil pipe has the advantages of short processing time, fast delivery and low cost. The rolling pipe is mainly used for pipes, billboards, etc.

The butt joint of coiled pipe (with the same wall thickness) shall not exceed 10% of the wall thickness and not more than 2mm.

.In order to realize the welding process of high frequency welding of steel plate, the charge induction between welding wire and welding coil is used to heat the weld to the edge of the weld. High frequency welding is a kind of induction welding (or pressure welding). It does not need welding filler and welding. It has narrow welding heat affected zone, beautiful welding shape and good welding mechanical properties. Therefore, it is widely used in steel pipe production. The pressure test of continuous pipe is carried out according to its specification and thickness, and its pressure bearing is also different. This thickness of welded pipe can withstand about 4kg to 10kg. I have been engaged in all kinds of hot-rolled steel pipes, large-diameter thick wall coiled pipes, thick wall straight seam coiled pipes, steel casing, coiled pipe factory and other materials all year round. I operate in good faith. Welcome to call! The following are the pressure test results of various pipes: specification working pressure (MPA) hydrostatic test pressure (MPA) ordinary steel pipe 00 thickened steel pipe 60 ductile iron socket straight pipe allowable pressure socket straight pipe dn40-dn250 allowable working pressure (PFA) 5-4mpa 4-4mpa large allowable working pressure (PMA) 0-7mpa 5-7mpa allowable test pressure (pea) 5-6mpa prepared according to standard metallography, Make the cut sample into metallographic sample. After 4% corrosion was removed from the ultrasonic generator, metallographic analysis was carried out on JSM-5610LV scanning electron microscope.

The rolling pipe factory mainly produces steel plate rolling pipe and thick wall rolling pipe. With the development of domestic economic situation and the acceleration of welding and casting trend, the advantage of NC cutting is gradually recognized. NC cutting not only greatly improves the rate of plate and product quality but also improves the working environment and labor efficiency. At present, the CNC cutting machines used in the thick wall rolling pipe processing industry are mainly flame and ordinary plasma cutting machines, but pure flame cutting can not meet the needs of modern production, At present, most CNC cutting machines are CNC plasma cutting machines. This type of cutting machine can meet the needs of thick wall coiled pipe plate processing and thick wall coiled pipe parts processing, so the demand will be greater and greater, mainly in

.After pushing the elbows should be formed in this hot state, because some elbows will be distorted after improper handling, which is not allowed. In addition, after pushing the head, the outer diameter of the front end is usually large and formed by the forming die. The forming die is actually a press. It must have a set of molds, one on each side. The outer diameter after forming reaches the size of the finished product.

Because the coiled steel pipe plays an important role in construction, railway construction and bridge construction, its quality standards are also more important. If you don't understand the quality specifications and standards, it is easy to have an impact. Generally, we can purchase from these aspects.

In general, the process of expanding the diameter of coiled pipe products can be divided into three stages. It is the preliminary rounding stage: the sector blocks are opened until all the sector blocks reach the steel pipe. At this time, the radius of each point in the steel pipe is almost the same within the step range, and the steel pipe is preliminarily rounded. The second stage is the nominal inner diameter stage: the sector starts to reduce the movement speed from the front position until it reaches the required position which is the inner circumference position of the finished pipe with quality requirements.


Q355b welded steel pipeThe main style features



In short, the use standard of coiled steel pipe is very important, and the above points can be reasonably explained. For the information of our rolled steel pipe, let's simply say so much today. If you need it, you can directly consult our manufacturer.

The material of large-diameter steel plate coil is mainly carbon steel, with a general steel plate thickness of 16mm. Large diameter coil is a kind of welded pipe product with simple and flexible process in large-diameter welded pipe. The manufacturer of large-diameter steel plate coil must connect two or more steel pipes, so the process of large-diameter welded pipe is relatively flexible, convenient and applicable. The disadvantage is that it can not carry out the production of mechanized assembly line.

The main materials are q23q3420, 435cimo and 42cimo, 16 manganese and 16 manganese capacity. Generally, cold rolled sheet can be used for pipe rolling, and the product standards are GB / t50205-200, GB / t3092-2001, etc. Continuous pipe is widely used in petroleum, chemical industry, natural gas transmission, pile driving, urban water supply, heat supply, gas supply and other projects.

Information recommendation.Move the steel pipe twice to weld and reinforce the rolled pipe joint, and then transport it to the welding platform for welding.

It should be noted that in practice, it is difficult to achieve the ideal proportion of metal sand and metal ball in the rinsing agent, because the hard and brittle metal sand has a higher crushing rate than the metal ball. For this reason, the mixture should be sampled continuously and the mixed rinse should be tested. According to the particle size distribution, the new rinse agent is added to the cleaning machine and the amount of metal sand is usually the same in the new rinse agent.

Welding voltage because the welding arc is conical, and the welding voltage directly affects the length of the arc. Therefore, the general production process of thick wall continuous pipe can be divided into cold drawing and hot rolling. The production process of cold rolled seamless steel pipe is generally more complex than that of hot rolled steel pipe. First, the pipe must be subject to winding diameter test. If there is no response crack on the surface, the round pipe will be cut and the growth of the blank is about M. However, during annealing, and attention should be paid to whether there are a large number of bubbles on the surface. If a large number of bubbles appear, the quality of the steel pipe will not meet the response standard. The appearance of cold-rolled seamless steel pipe is shorter than that of hot-rolled seamless steel pipe, and the wall thickness is generally smaller than that of hot-rolled seamless steel pipe, but the surface is brighter than that of thick wall seamless steel pipe, the surface is not too rough, the diameter is not too prickly, and the strength is high. The manufacturer offers, operates in good faith, and has a real price. The same specification thick wall continuous pipe, spot supply, the arc length increases, the moving range of solder joint increases and the molten pool widens. If welding is carried out in a horizontal position, the weld width will be changed, but the edge transition of the weld will not be affected. However, the external welding of spiral welded pipe is carried out on the slope, and the molten weld metal will flow laterally under the action of gravity. We specialize in providing hot-rolled steel pipe, large-diameter thick wall continuous pipe thick wall straight seam continuous pipe, steel casing and quality assurance of pipe rolling plant. During the preferential activities, new and old customers are welcome to consult. Therefore, the greater the welding voltage, the more serious the transverse flow of weld metal, and finally lead to the bias of weld metal.


Q355b welded steel pipeThe main style features



When the nominal diameter is greater than or equal to 600mm, back welding shall be carried out in the pipe.

Quality management.First, select the specification and put forward the pipe, such as 90 & deg; Elbow, which can calculate the curvature to calculate the 90 DEG of the long material; Elbow, and then cut with the length as the fixed length.

Raw materials such as ferric chloride are prepared into corrosive solution in proportion. Generally, the production process of thick wall continuous pipe can be divided into cold drawing and hot rolling. The production process of cold rolled seamless steel pipe is generally more complex than that of hot rolling. The pipe blank must first be tested for coil diameter. If there is no response crack on the surface, the round pipe shall be cut into a blank with a length of about m by a cutter, but acid shall be used for annealing during annealing, and attention shall be paid to whether there are a large number of bubbles on the surface. If a large number of bubbles appear, the quality of the steel pipe will not meet the response standard. The appearance of cold-rolled seamless steel pipe is shorter than that of hot-rolled seamless steel pipe, and the wall thickness is generally smaller than that of hot-rolled seamless steel pipe, but the surface is brighter than that of thick wall seamless steel pipe, the surface is not too rough, the diameter is not too prickly, and the strength is high. The manufacturer offers, operates in good faith, and has a real price. The same specification, thick wall continuous pipe, spot supply, and complete specifications. Then, the observed metallographic samples were put into it for deep corrosion. Professional hot rolled steel pipe, large diameter thick wall rolling pipe, thick wall straight seam rolling pipe, rolling pipe factory, high price, service, on-site settlement, honest operation! The corroded sample is cleaned in the ultrasonic generator after cleaning, and the powder falling off the sample during ultrasonic cleaning is collected for filtration and drying to obtain the carbide particles falling off the sample after corrosion. The pipe rolling plant will conduct scanning electron microscope and energy spectrum analysis on the cleaned samples and collected carbonization. What is the application of pressure perforation in pipe rolling production?

After, we should prevent the surface damage of the plate. The parts with serious scars must be grinded to make transition, and the wall thickness of the grinded part shall not be less than the design wall thickness. Steel rolling pipe is an unconventional pipe, and there is no domestic standard at present. Therefore the inspection is mainly aimed at the thickness and weld quality.

.In the production process, the hot-rolled steel pipe has the characteristics of no raw materials, that is, the mechanical properties of thick wall steel plate. In this way, the steel plate is heated first and then rolled, which softens the steel plate under great conditions, which will not affect the material quality, nor damage the properties such as strength, yield and tensile strength. For the wall thickness that can not be achieved by cold rolled steel pipe, the specification and model of thick wall steel pipe are added.

The quality of steel rolling pipe is greatly affected by the size of weld, mainly including welding process parameters, shape and position parameters of welding wire, flux flow, flux process performance, forming joint and other comprehensive factors.

The pipeline installation sequence is based on the principle of sub area and sub system, with small diameter, from the lower layer to the upper layer, from difficult to easy, from the pipe gallery to the equipment. In principle, the pipeline connected with the machine is configured from the inside to the outside to reduce the impact of welding stress on the installation accuracy of the machine. The interface between indoor and outdoor pipelines shall be left outdoors. Q345B thick wall coiled pipe is a kind of material in carbon steel and is widely used. The thickness of Q345B thick wall coiled pipe is generally more than 10mm, which is widely used in drainage engineering, sewage pipeline, dredging pipeline, construction pipeline, etc. Q345B thick wall coiled pipe is a welded pipe product, the raw materials are not good. The main problem of Q345B thick wall coiled pipe is welding. As long as it is possible, the delivery related requirements can be compared with other products.