Q345B thick wall coiled pipeWhat is the process during operation?

announcer:hp709HP180518493 release time:2022-01-18 19:38:28

With the development of domestic economic situation and the acceleration of welding and casting trend, the advantages of NC cutting are gradually recognized. It has long provided various brand products such as hot-rolled steel pipe, large-diameter thick wall rolling pipe, thick wall straight seam rolling pipe, steel casing and rolling pipe factory. The designated products are complete and the quality is guaranteed. NC cutting not only greatly improves the rate of plate and product quality, but also improves the working environment and labor efficiency. At present, the NC cutting machines used in the thick wall coil processing industry are mainly flame and ordinary plasma cutting machines, but pure flame cutting can not meet the needs of modern production. At present, most NC cutting machines are NC plasma cutting machines. This type of cutting machine can meet the needs of thick wall coiled pipe plate processing and thick wall coiled pipe parts processing, so the demand will be greater and greater, but there is still a very obvious gap with foreign countries, which is mainly reflected in: 90% of the developed thick wall coiled pipe processing industry is digital control cutting machine, and only 10% is manual cutting; The CNC cutting machine only accounts for part of the total blanking. 10%, of which the proportion of NC plasma cutting is small. In industrial production, the thermal cutting of thick wall coiled pipe generally includes gas cutting, plasma cutting, laser cutting and so on. Among them, plasma cutting has a wider cutting range than gas cutting More efficient. Fine plasma cutting technology is close to laser cutting in material cutting surface quality, but the cost is much lower than laser cutting. Therefore, since the successful development of the United States in the mid-1950s, plasma cutting has developed rapidly. With the rapid development of computer and digital technology, NC cutting is also developing, which improves the machining accuracy. It shows great advantages in saving materials and improving labor productivity. This leads to the development of plasma cutting technology from manual or semi-automatic to NC, which has become one of the main directions of NC cutting technology. NC plasma cutting technology is a set of high-tech technologies such as NC technology, plasma cutting technology and inverter power supply technology. Its development is based on the common progress of computer, plasma arc characteristic research, power electronics and other disciplines. The CNC cutting technology began in the 1980s, and the CNC plasma cutting technology was later. However, recently some domestic universities, research institutes and manufacturers have studied NC plasma cutting technology and gradually developed and produced various specifications of NC plasma cutting equipment, narrowing the gap of foreign advanced technology.

Thick wall coiled pipe is made of steel plate. Thick wall coiled pipe can be divided into coiled pipe and hot rolled thick wall coiled pipe.

.What are the advantages of thick wall coiled pipe end sizing?

Weld inspection is necessary to detect the weld quality of steel coil pipe. After welding, all the welds are tested by on-line continuous ultrasonic automatic flaw detector to ensure the NDT coverage of the welds. If there are defects it will automatically alarm and spray marks, and the production will adjust the process parameters at any time to eliminate the defects in time.

.Columns for bearing steel structures such as offshore platforms, super long-span building structures and electric pole tower and mast structures requiring wind resistance and earthquake resistance. Inspection equipment maintenance and packaging strategy: 16Mn thick wall coil adopts PLC automatic system, and all parts of Shenzhen thick wall coil focus on panel operation. The cutting length of 16Mn thick wall coil adopts photoelectric induction, which runs smoothly, Shenzhen thick wall coiled pipe has good cutting synchronization performance. 16Mn thick wall coiled pipe has different application ranges: length: 0-1400mm, thickness: 2-15mm, diameter: 20-200mm, application: 3 inches x2 4x, application voltage: 380V 50Hz. It is used according to the specified parameters and range to ensure that it can play an important role and value in use. The packaging process of new product 16Mn thick wall coil includes main processes such as filling, wrapping and sealing, as well as related pre and post processes, such as cleaning, stacking and disassembly. The process of 16Mn thick wall rolling pipe shall be strict, and it shall be produced in the correct way and principle. In addition, the process of 16Mn thick wall coiled pipe also includes measuring or stamping on the package. The use of mechanical packaging products can improve productivity, reduce labor intensity, d7z3xjb87v21w and meet the requirements of cleanliness and hygiene. The production process of rolling pipe is round pipe blank → Heating → Perforation & rarr; Roll cross rolling, continuous rolling or → Off pipe & rarr; Sizing (or reducing) → Cooling → Straightening & rarr; Hydrostatic test (or flaw detection) → Mark & rarr; According to different production, warehousing supply indicators can be divided into hot-rolled pipe, cold-rolled pipe, cold drawn pipe, pipe, etc. quality management? Hot rolled seamless tubes are produced on the automatic tube rolling mill. The solid tube blank is cut into the required length by removing the surface defects. The Shenzhen coiled tube is centered on the end face of the perforated end of the tube blank and then sent to the heating furnace for heating. It is perforated on the piercing machine. At the same time, it rotates and advances continuously. Under the action of the roll and top head, a cavity called rough tube is gradually formed inside the tube blank, Then it is sent to the automatic pipe mill for continuous rolling, and the wall thickness is adjusted by the whole machine. The Shenzhen coiled pipe is sized by the sizing machine to meet the specification requirements. The production of hot-rolled seamless steel pipe by the continuous pipe mill is relatively advanced. If you want to obtain seamless pipe with smaller size and better quality, 888yixtfrfsbu Shenzhen coil pipe must be cold rolled and cold drawn or a combination of the two. The cold rolling is usually carried out on the roll mill. The steel pipe is rolled in the annular pass composed of variable section circular hole groove and fixed conical plug. The cold drawing is usually carried out on the single chain or double chain cold drawing machine, that is, the heated pipe blank is placed in a closed cylinder, and the perforated rod and rod move, Professional hot-rolled steel pipe, large-diameter thick wall rolling pipe, thick wall straight seam rolling pipe, steel casing, rolling pipe factory has advanced technology, strict testing, more affordable price and more preferential. Welcome to consult. Make the parts extruded from the smaller die hole. This method can produce the steel pipe with smaller diameter. Work course standard requirements & amp; amp; quot;Standard requirements: the Executive Standards of hot-rolled thick wall coil product line are: GB / t50205-200, GB / t3092-2001, etc.

The continuous pipe has good characteristics and performance in use, and advanced technology is adopted. If we want to make progress and enhance competitiveness, we must have a good opportunity at present. Just like the development of the iron and steel industry, although the pipe rolling industry has made remarkable achievements in recent years, accounting for more than 1 / 4 of the world's output, product quality and product grade, enterprise economic scale and main technical and economic indicators. The coil adopts PLC automatic system, and each part is operated on the panel. The cutting length of winding tube adopts photoelectric induction, accurate positioning and automatic cutting. Each process adopts double pump oil pressure system to ensure stable operation. The pipe rolling has different application ranges: winding pipe length: 0-1400mm, winding pipe diameter: 20-200mm, purpose: 3 inches x24x, working voltage: 380V, 50Hz. It can be used according to the specified parameters and scope, so as to ensure that it can play an important role and value in use. Large coil is durable, stable and easy to operate. The packaging process of coil includes filling, packaging, sealing and other main processes, as well as relevant pre and post processes such as cleaning, stacking and disassembly. In addition the rolling process also includes measuring or stamping on the package. Using mechanical packaging products can improve productivity, reduce labor intensity, meet the needs of large-scale production and meet the requirements of cleanliness and hygiene. With the emergence of new packaging materials and the continuous innovation of packaging technology, spiral pipe can play an important role and value in different industries and fields.

Clean the iron oxide scale falling off in the process of plate drum to prevent the iron oxide scale from bonding and the surface of steel plate.


Q345B thick wall coiled pipeWhat is the process during operation?



The second stage is called the complex compensation stage, that is, the sector of the coiled pipe will gradually reduce its speed until it reaches the required position, which is the pressure maintaining and stability stage required by the equipment and expanding process.

In the cleaning and preheating process of thick wall coiled pipe, firstly, clean the surface of thick wall coiled pipe to remove grease and scale, and preheat the pipe body with heating furnace to keep the surface of thick wall coiled pipe dry. During the spraying (throwing) treatment, because the surface of the thick wall coil does not contain grease and other dirt, the derusting effect can be enhanced. The dry surface of the thick wall coil is also conducive to the separation of steel shot, steel sand and rust and oxide scale, so as to make the surface of the thick wall coil more clean after derusting.

Compared with seamless steel pipe, thick wall rolling pipe has the disadvantages of low cost, rapid delivery, breaking the fixed specification of seamless steel pipe, etc. Thick wall coiled pipe is made of steel plate or steel strip by bending and then welding. According to the weld form, it is divided into straight welded pipe and spiral welded pipe. According to the purpose, it is divided into general welded pipe galvanized welded pipe, oxygen blowing welded pipe, wire sleeve, metric welded pipe, idler pipe, deep well pump pipe, automobile pipe, transformer pipe, electric welding thin-wall pipe, electric welding special-shaped pipe and spiral welded pipe. Rolling pipe is committed to producing all kinds of rolling pipes and steel penstocks with circumferential seam and longitudinal ring, and is reformed on the basis of similar specifications and models of traditional rolling equipment. The function of improving the parameters of the rolling and welding steel pipe equipment by 30% fills the gap that the original traditional rolling equipment can not produce. It can produce steel pipes with diameter of more than 400 and wall thickness of 8-100mm. Materials mainly include q23 q34 20#, etc. Product executive standard: GB / t50205-200 GB / t3092-2001, etc. The products are widely used in petroleum, chemical industry, natural gas transportation, pile driving and urban water supply heating, gas supply and other projects.

details.The weld reinforcement is increased, the weld formation is deteriorated and the edge transition is poor.

The main materials are q23q3420, 435cimo and 42cimo, cold rolled sheet can be used for pipe rolling, and the product standards are GB / t50205-200, GB / t3092-2001, etc. Continuous pipe is widely used in petroleum, chemical industry, natural gas transmission, pile driving, urban water supply, heat supply, gas supply and other projects.

The process of heating the whole thick wall coil or welding area before welding is called preheating. For the steel with high welding strength grade, it has hardening trend, material, especially good thermal conductivity, weldment and large thickness. When the ambient temperature around the welding area is too low, it is necessary to preheat the weldment before welding.


Q345B thick wall coiled pipeWhat is the process during operation?



Columns for bearing steel structures such as offshore platforms, super long-span building structures and electric pole tower and mast structures requiring wind resistance and earthquake resistance. Inspection equipment maintenance and packaging strategy: 16Mn thick wall coil adopts PLC automatic system, and all parts of Shenzhen thick wall coil focus on panel operation. The cutting length of 16Mn thick wall coil adopts photoelectric induction, accurate positioning and automatic cutting. Each working process adopts double pump oil pressure system, which runs smoothly, Shenzhen thick wall coiled pipe has good cutting synchronization performance. 16Mn thick wall coiled pipe has different application ranges: length: 0-1400mm, thickness: 2-15mm, diameter: 20-200mm, application: 3 inches x2 4x, wrapping and sealing, as well as related pre and post processes, such as cleaning, stacking and disassembly. The process of 16Mn thick wall rolling pipe shall be strict, and it shall be produced in the correct way and principle. In addition, the process of 16Mn thick wall coiled pipe also includes measuring or stamping on the package. The use of mechanical packaging products can improve productivity, reduce labor intensity, meet the needs of large-scale production, d7z3xjb87v21w and meet the requirements of cleanliness and hygiene. The production process of rolling pipe is round pipe blank → Heating → Perforation & rarr; Roll cross rolling, continuous rolling or → Off pipe & rarr; Sizing (or reducing) → Cooling → Straightening & rarr; Hydrostatic test (or flaw detection) → Mark & rarr; According to different production warehousing supply indicators can be divided into hot-rolled pipe, cold-rolled pipe, cold drawn pipe, pipe, etc. quality management? Hot rolled seamless tubes are produced on the automatic tube rolling mill. The solid tube blank is cut into the required length by removing the surface defects. The Shenzhen coiled tube is centered on the end face of the perforated end of the tube blank, and then sent to the heating furnace for heating. It is perforated on the piercing machine. At the same time, a cavity called rough tube is gradually formed inside the tube blank, Then it is sent to the automatic pipe mill for continuous rolling, and the wall thickness is adjusted by the whole machine. The Shenzhen coiled pipe is sized by the sizing machine to meet the specification requirements. The production of hot-rolled seamless steel pipe by the continuous pipe mill is relatively advanced. If you want to obtain seamless pipe with smaller size and better quality, 888yixtfrfsbu Shenzhen coil pipe must be cold rolled and cold drawn or a combination of the two. The cold rolling is usually carried out on the roll mill. The steel pipe is rolled in the annular pass composed of variable section circular hole groove and fixed conical plug. The cold drawing is usually carried out on the single chain or double chain cold drawing machine, that is, the heated pipe blank is placed in a closed cylinder, and the perforated rod and rod move, Professional hot-rolled steel pipe large-diameter thick wall rolling pipe, thick wall straight seam rolling pipe, steel casing, rolling pipe factory has advanced technology, strict testing, more affordable price and more preferential. Welcome to consult. Make the parts extruded from the smaller die hole. This method can produce the steel pipe with smaller diameter. Work course standard requirements & amp; amp; quot;Standard requirements: the Executive Standards of hot-rolled thick wall coil product line are: GB / t50205-200, GB / t3092-2001, etc.

How much does it cost?.1800mm steel pipe elbow detailed introduction to elbow: first of all, the material is hot pushed, the pusher is a horn shaped core or mandrel, the mandrel is thickened and thickened the process of pushing the elbow is the process of expanding the diameter, and it is supported on the back. The material tube part passes through the mandrel, and there is an arched frame at the rear to fix the mandrel. There's a car in the middle. Some cars are driven hydraulically others are driven by mechanical transmission, that is, screw drive, and then the car pushes forward and the car pushes the pipeline along the core. The rod moves forward, there is an induction coil outside the mandrel, the tube is heated and heated, and then the trolley pushes the tube down and processes one.

How big can the diameter of thick wall coiled pipe be? Thick wall coiled pipe sometimes has two welds. Why does this happen? It is mainly due to raw material problems and equipment processing problems. The width of the welded pipe required by the customer is not produced by the steel plant, so the two plates must be welded, so this kind of weld occurs. The main problem of thick wall coiled pipe is welding. As long as the flaw detection can be carried out, the delivery can be carried out. The relevant requirements are broader than other products. The detection of thick wall coiled pipe is mainly ultrasonic flaw detector, and the longitudinal weld on the same cylinder section of coiled pipe should not be more than two. The group of butt welds of coiled pipe shall be flush. When the nominal diameter is greater than, back sealing welding shall be carried out in the pipe. During pipe rolling processing the surface damage of the plate shall be prevented. High cost. Hot rolled thick wall coiled pipe is widely used: oil cylinder, hydraulic pressure, bridge, roller, etc& amp; amp; quot; Compared with seamless steel pipe, thick wall coil has the disadvantages of low cost, breaking the fixed specification of seamless steel pipe, etc. Quality department 3 editing of welding process and welded pipe type thick wall coiled pipe is made of steel plate or steel strip after bending and then welding. According to the weld form, it is divided into straight welded pipe and spiral welded pipe. According to the purpose, it is divided into general welded pipe, galvanized welded pipe, oxygen blowing welded pipe, metric welded pipe, idler pipe, deep well pump pipe, automobile pipe, transformer pipe, electric welding thin-wall pipe, electric welding special-shaped pipe and spiral welded pipe. Objective knowledge packaging strategy thick wall steel plate coil - thick wall steel plate coil price thick wall coil is formed by bending steel plate or steel strip, with the electrical model of 031 inspection 8517611 standard, and then made by high-frequency welding and submerged arc welding. According to the weld form, it is divided into straight welded pipe and spiral welded pipe. According to the purpose, it is divided into general welded pipe, galvanized welded pipe, wire sleeve, metric welded pipe, idler pipe, deep well pump pipe, automobile pipe, transformer pipe electric welded thin-walled pipe, electric welded special-shaped pipe and spiral welded pipe, coil, Q235B coil, Q345B coil, large-diameter thin-walled coil, large-diameter thick-walled coil, stainless steel coil, L360 coil and 16Mn coil, Quality. Preferential activities are in progress. Welcome to consult. Large diameter welded pipe, etc. The large-scale thick wall rolling equipment has the advantages of 3000mm outer diameter, 200mm wall thickness and 2mm roundness: compared with seamless steel pipe, thick wall rolling pipe has the disadvantages of low cost, rapid delivery, breaking the fixed specification of seamless steel pipe, etc.

When the pipe is rolled, the distance between the two welds shall be greater than 100mm, and the distance between the outer wall of the outer branch pipe shall not be less than 50mm.

.The inspection requirements for thick wall coiled pipe treatment are that the thick wall coiled pipe is made of steel plate. The thick wall coiled pipe can be divided into coiled pipe and hot rolled thick wall coiled pipe. Generally, the round pipe shall be cut by a cutter and cut into a blank with a length of about meters. However, when entering the annealing process, acid shall be used for annealing, and attention shall be paid to whether a large number of bubbles are generated on the surface. If a large number of bubbles are generated, it indicates that the quality of steel pipe can not meet the response standard. In appearance, the cold-rolled seamless steel pipe is shorter than the hot-rolled seamless steel pipe, and its wall thickness is generally smaller than that of the hot-rolled seamless steel pipe, but the surface is brighter than that of the thick wall seamless steel pipe. There is not too much roughness on the surface, and there are not too many burrs in the diameter. The thick wall coiled pipe is a powerful manufacturer, quotation, honest operation, genuine and of the same quality. The thick wall coiled pipe is available from stock, with complete specifications,. The wall thickness of coiled pipe is 20mm and the outer diameter is 450-3000mm. It is rolled, welded, formed, butted, removed and reinforced directly from the steel plate. Coil processing time is short and delivery is fast.

Recently, with the rapid development of excellent strip continuous rolling production and the progress of welding and inspection technology, the weld quality has been continuously improved, and the technology of welded pipe has also been continuously improved, and the application field is relatively wide, so as to gradually replace the seamless steel pipe. The main one is the technological development of welded pipe. Our welded pipe is made of steel plate or strip steel and welded after crimping. It is generally a welding process, which improves the production efficiency and service quality of welded pipe.

After, we should prevent the surface damage of the plate. The parts with serious scars must be grinded to make transition and the wall thickness of the grinded part shall not be less than the design wall thickness. Steel rolling pipe is an unconventional pipe, and there is no domestic standard at present. Therefore, the inspection is mainly aimed at the thickness and weld quality.